Microfusion Certifications
Microfusion Single Phase Power Controller
MicroFUSION controller
microfusion controller single phase
Microfusion SRC power controller
Microfusion Certifications
Microfusion Single Phase Power Controller
MicroFUSION controller
microfusion controller single phase
Microfusion SRC power controller

More Information

You will need to login or register to access manuals and view product drawings. Adobe Reader is needed to view pdf files.

MicroFUSION Single Phase Datasheet MicroFUSION CE RoHS Declaration
** 1-Pole Touchsafe Fusekit only recommended for line to neutral applications.

MicroFUSION Single Phase

Status: 
Actively Shipping - Recommended for new designs
Phases: 
Single phase
Firing mode: 
Phase angle
Zero cross
Zero Cross Transformer Mode
Fast Zero Cross
Output: 
AC
Amp Sizes: 
8, 16, 32, 50, 80, 100, 130, 160, 200, 240, 320, 400
Voltage: 
24-690 VAC (CE), 24-600 VAC (UL), 45-65 Hz
Control: 
Analog
Digital
Feedback type: 
Voltage
Current
Power
External
Features: 

The controller features the following:

  • Auto-ranging input voltage (CE: 24-690 VAC, UL: 24-600 VAC, 45-65 Hz)
  • 16, 32, 50, 80, 100, 130, 160, 200, 240, 320, 400 Amp AC output (at 50° C, 6000 ft)
  • Adjustable soft start
  • UL, cUL, CE, RoHS, 100kA SCCR certifications
  • Missing cycle detection
  • SYNC-GUARD and TRANS-GUARD
  • Dedicated RUN/STOP bit
  • Analog interface: up to two analog inputs, two retransmits 
  • Fieldbus options: EtherNet/IP, PROFINET, Modbus TCP
  • Easy setup via Plug-n-Play USB
  • Thermistor
  • OEM options (consult factory)

MicroFUSION Single Phase Power Controller

 

MicroFUSION is available with one of two circuit boards.  SX is a lower-cost alternative, whereas HX features CCI Link™ and is a fully populated board that can be field-upgraded to include retransmits and other features.

Available options include:

  • General purpose input
  • Second analog input channel (second setpoint, potentiometer input, external feedback, or pulse width modulation (PWM))
  • Alarm relay (form C)
  • 2 x 16 bit analog retransmits (0-10 VDC or 0/4-20 mA)
  • Remote display (2-line, 16-character text display)
  • High performance: True RMS power, load vontage feedback, load current feedback, high resolution control loop
  • Increased accuracy, linearity
  • Current limit
  • External, touchsafe Class T Fusing
Retransmit: 
Load voltage
Load current
Load power
Limits: 
Voltage limit
Current limit
Power limit
Alarms: 
Overtemp
Shorted SCR
Communications Loss
Current Limit
Open Load
Over current trip
Partial Load Fault
Power Limit
Voltage Limit
Phase loss
Agency approvals: 
UL
CE
RohS
cUL/CSA
100 kA SCCR