Inactive - Repairs only

The model 1029C is a single phase, phase-angle SCR power controller. The controller linearly controls, with respect to a command signal, either the RMS value of the load voltage, the average value of the load voltage, the RMS load current or load power. The controller can be configured to accept all standard industrial command signals as well as many non-standard commands.

Note: 3629C superseded 3629B

• Six SCR
• Line voltage compensation holds load voltage constant with changes in line voltage
• Soft-start for transformer loads.
• Missing cycle detection.
• Can be used with all load types.
• Thermostatically protected.
• Compact and economical

• Six SCR
• Line voltage compensation holds load voltage constant with changes in line voltage
• Sync-Guard™ smoothes out line current draw when multiple controllers are in use.

• Four SCR
• Line voltage compensation holds load voltage constant with changes in line voltage
• Sync-Guard™ smoothes out line current draw when multiple controllers are in use.

• Four SCR
• Line voltage compensation holds load voltage constant with changes in line voltage
• Sync-Guard™ smoothes out line current draw when multiple controllers are in use.
• Trans-Guard™ decreases the possibility of DC building up on the supply transformer.

Note: 1029D has superseded 1029C

• Line voltage compensation holds load voltage constant with changes in line voltage
• Soft-start for transformer loads.
• Missing cycle detection.
• Can be used with all load types.
• Thermostatically protected.
• Metering outputs representing both load current and load voltage.
• Compact and economical