Plating Applications
Salt Baths, Electroplating, Anodizing
Controllers best suited for plating applications are listed below:
Model | Phase | Mode | Voltage | Current | Highlights |
---|---|---|---|---|---|
1802 | One | DC | 120-575 Vac | 10-40 Amps halfwave rectified DC | Accepts Vdc or potentiometer commands. 60Hz halfwave DC output. |
1805 | One | DC | 120-575 Vac | 10-40 Amps halfwave rectified DC | Accepts mA commands. 60Hz halfwave DC output. |
1822 | One | DC | 120-240 Vac | 10-30 Amps fullwave rectified DC | Accepts Vdc or potentiometer commands. 120Hz fullwave DC output. |
1825 | One | DC | 120-240 Vac | 10-30 Amps fullwave rectified DC | Accepts mA commands. 120Hz fullwave DC output. |
3629C | Three | Phase Angle | 208-575 Vac | 50-1000 Amps | Higher current ratings than our solid state relay models. Features include: current limiting, shorted SCR detection, over-current trip |
3869 | Three | DC | 120-480 Vac | 300-400 Amps fullwave rectified DC | Accepts most commands. High current, three phase DC output. |
FUSION Single Phase DC | One | DC | 24 - 600 Vac, 45 - 65 Hz (Auto-Ranging) |
45-1080 Amps Full Wave Rectified | 24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a half controlled SCR bridge. |
FUSION Three Phase AC | Three | Phase Angle or Zero Cross | 24 - 600 Vac, 45 - 65 Hz (Auto-Ranging) |
50 - 1200 Amps | 24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired SCR controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to a three phase electrical load. The 3 phase controller can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Control is achieved for 3 leg by three pairs of inverse parallel SCRs or in 2 leg by 2 pairs of inverse parallel SCRs. |
FUSION Three Phase DC | Three | DC | 24 - 600 Vac, 45 - 65 Hz (Auto-Ranging) |
60 - 1400 Amps Full Wave Rectified | 24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle-fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a six SCR bridge with freewheeling diode. |
Compact FUSION Single Phase | One | Phase Angle, Zero Cross, Burst | 24-600 Vac, 45-65 Hz (Auto-Ranging) |
10 - 160 Amps | 24 - 600 Vac. A microprocessor-based SCR controller, operating with both analog and digital interfaces. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback. |
Compact FUSION Three Phase | Three | Phase Angle, Zero Cross, Burst | 24-600 Vac, 45-65 Hz (Auto-Ranging) |
10 - 160 Amps | 24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. Can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback. |
Learn more about firing modes here.
Learn more about load connections here.