Analog SCR

Note: our microprocesor-based controllers like FUSION and MicroFUSION operate in both analog and digital environments. 

Model Phases Firing Mode Output Current Low Current High Highlights
MicroFUSION Three Phase Three phase Phase angle, Zero cross, Zero Cross Transformer Mode AC 8 400

MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment.

MicroFUSION Single Phase Single phase Phase angle, Zero cross, Zero Cross Transformer Mode AC 8 400

MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment. 

FUSION Three Phase (DC) Power Controller Three phase Phase angle DC 60 1 400

24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle-fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a six SCR bridge with freewheeling diode.

FUSION Three Phase (AC) Power Controller Three phase Phase angle, Zero cross, Burst AC 50 1 200

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired SCR controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to a three phase electrical load. The 3 phase controller can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Control is achieved for 3 leg by three pairs of inverse parallel SCRs or in 2 leg by 2 pairs of inverse parallel SCRs.

FUSION Single Phase (DC) Power Controller Single phase Phase angle DC 45 1 080

24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a half controlled SCR bridge.

FUSION Single Phase (AC) Power Controller Single phase Phase angle, Zero cross, Burst AC 50 1 200

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to an electrical load. Control is achieved by means of a pair of inverse parallel SCRs.

Compact FUSION Three Phase Power Controller Three phase Phase angle, Zero cross, Burst AC 10 160

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. Can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.

Compact FUSION - Single Phase Power Controller Single phase Phase angle, Zero cross, Burst AC 10 160

24 - 600 Vac. A microprocessor-based SCR controller, operating with both analog and digital interfaces. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.

3869 Three Phase DC Power Controller Three phase Phase angle DC 300 400

120 - 480 Vac. DC SCR Controller. Accepts most commands. High current, three phase DC output.

3659
3629C Three Phase Power Controller Three phase Phase angle AC 50 1 000

208 - 575 Vac. Three Phase SCR Controller. Higher current ratings than our solid state relay models. Features include: current limiting, over-current trip, shorted SCR detection.

3629B
3337 Three Phase Zero Cross Power Controller Three phase Zero cross AC 200 750

208 - 575 Vac. Three Phase, Zero Cross SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, shorted SCR detection and on-board line fusing for most frame sizes.

3227 Three phase Zero cross AC 10 60
3095
3037 Three Phase Zero Cross Power Controller Three phase Zero cross AC 85 750

208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, Shorted SCR detection and on-board line fusing for most frame sizes.

3027 Three Phase Power Controller Three phase Zero cross AC 85 750

208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard and on-board line fusing for most frame sizes.

3023 Three phase Zero cross AC 10 70
2007-070901
1849 Single phase Phase angle DC 10 70
1059
1049 Single phase Phase angle
1047 Single phase Zero cross AC 10 60
1039I
1039 Phase angle AC
1037A Single phase Zero cross AC 50 750

120 to 575 Vac. Accepts most commands. Features include: Sync-guard, Trans-guard, shorted SCR detection, command limit and metering outputs.

1035 Single phase Phase angle AC
1032 Single phase Phase angle AC 10 70
1031 Single phase Phase angle AC 10 70
1029M Single phase Phase angle AC 30 200
1029D Single phase Phase angle AC 50 1 000

120 to 575 Vac. Analog SCR Controller. Higher current ratings than our solid state relay models. Features include: current limiting, shorted SCR detection, over-current trip, metering outputs, user selectable feedback modes.

1029C Single phase Phase angle AC 50 750
1028A Single phase Phase angle AC 100 1 000
1027 Single Phase AC SCR Analog Controller Single phase Zero cross AC
1026 Single Phase Zero-Cross SCR Analog Controller Single phase Zero cross AC 120 240
1025 Single Phase AC Analog SCR Single phase Phase angle AC 10 70

120 - 480 Vac. Analog SCR Controllers. Accepts mA commands.

1022 AC Single Phase Analog SCR Single phase Phase angle AC 10 70

120 - 480 Vac. Analog SCR Controllers. Accepts Vdc and potentiometer commands.

1021B AC Single Phase Analog SCR Single phase Zero cross AC 10 70

120 - 575 Vac. Analog SCR Controller. Sync-guard™ smoothes out line current draw when multiple controllers are in use.

1021A Single Phase Zero-Cross Power Controller Single phase Zero cross AC 10 70

120 - 575 Vac. Analog SCR Controller. Accepts most commands.

1020 AC Zero-Cross Single Phase Power Controller Single phase Zero cross AC 10 70

120 - 575 Vac. Analog SCR Controller. Powered off of the 4/20mA loop, so no control transformer is required.