More Information

You will need to login or register to access manuals and view product drawings. Adobe Reader is needed to view pdf files.

1027M

Status: 
Special Order - Not recommended for new designs: minimum qty and/or lead time may apply
Phases: 
Single phase
Firing mode: 
Zero cross
Output: 
AC
Features: 

The 1027M is available as a Custom OEM model only. Contact the factory for more information.

The model 1027M is a single-phase, zero cross power controller. The average output voltage is proportional to the command signal. Sync-Guard and Trans-Guard features are built into the model 1027M.

 

The model 1027M will accept a 4 to 20mA command signal. When this signal is absent, the controller will automatically use the internal manual command pot to control the output.

 

If an external potentiometer is desired for remote operation, terminals are provided for this purpose. For full range control by the external pot, the internal pot must be turned to minimum. The internal pot may be used to set a minimum level of command for the external potentiometer.