Vibratory Parts
Controllers best suited for vibratory parts applications are listed below:
| Model | Phase | Mode | Voltage | Current | Highlights |
|---|---|---|---|---|---|
| 1802 | One | DC | 120-575 Vac | 10-40 Amps halfwave rectified DC | Accepts Vdc or potentiometer commands. 60Hz halfwave DC output. |
| 1805 | One | DC | 120-575 Vac | 10-40 Amps halfwave rectified DC | Accepts mA commands. 60Hz halfwave DC output. |
| 1822 | One | DC | 120-240 Vac | 10-30 Amps fullwave rectified DC | Accepts Vdc or potentiometer commands. 120Hz fullwave DC output. |
| 1825 | One | DC | 120-240 Vac | 10-30 Amps fullwave rectified DC | Accepts mA commands. 120Hz fullwave DC output. |
| 3869 | Three | DC | 120-480 Vac | 300-400 Amps fullwave rectified DC | Accepts most commands. High current, three phase DC output. |
| FUSION Single Phase DC | One | DC | 24 - 600 Vac, 45 - 65 Hz (Auto-Ranging) |
45-1080 Amps Full Wave Rectified | 24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a half controlled SCR bridge. |
| FUSION Three Phase DC | Three | DC | 24 - 600 Vac, 45 - 65 Hz (Auto-Ranging) |
60 - 1400 Amps Full Wave Rectified | 24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle-fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a six SCR bridge with freewheeling diode. |
| Compact FUSION Single Phase | One | Phase Angle, Zero Cross, Burst | 24-600 Vac, 45-65 Hz (Auto-Ranging) |
10 - 160 Amps | 24 - 600 Vac. A microprocessor-based SCR controller, operating with both analog and digital interfaces. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback. |
| Compact FUSION Three Phase | Three | Phase Angle, Zero Cross, Burst | 24-600 Vac, 45-65 Hz (Auto-Ranging) |
10 - 160 Amps | 24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. Can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback. |
Learn more about firing modes here.
Learn more about load connections here.